How To Adjust Shimano Hydraulic Disc Brakes On A Bike

When squeezing the brake lever the oil or brake fluid is compressed to apply the press to disc brake pads so the disc rotor is squeezed between the two pads.

How to adjust shimano hydraulic disc brakes on a bike. It should be centered. Push pistons back into caliper body. Is the brake lever touching the handlebar.

How do you bleed Shimano hydraulic disc brakes. Check that the brake components have cooled down sufficiently before attempting to adjust the brakes. You also need to check for leaks and loss of fluid and check the wear on the brake.

Also I assume brake padsdiscs are not contaminated and caliper is straight in relation to the disc. Im planning to ride tomorrow so before getting too far I first took inventory to make sure I have all the parts rotors adapters and tools needed for the installation. As you use your brakes dirt and brake dust sneak past the piston seals and dirty the brake fluid.

Hydraulic disc brakes are the way to go and the M355 are really nice for the price. Generally hydraulic disc brakes have two brake pad move to apply pressure to the rotor. Sometimes it goes off center for various reason.

Adjust the brake lever so it is level. Thread in the Shimano brake bleed funnel and leave the plunger in. Hold the hose at this point against the handlebar where the brake lever will eventually be fixed.

Hydraulic disc brakes pads are self adjusting for wear so if the lever needs to be pulled back too far or is hitting the handlebar the hydraulic system needs to be put through the proper bleeding process to remove air bubbles. How do you adjust Shimano hydraulic road disc brakes. For Shimano Hydraulic Disc Brake Levers however there will be a 2mm.